Before we get into the details of blown-in vs rolled insulation, let’s make sure we’re on the same page. To start with, attic insulation is vital to the comfort of your home and its energy efficiency. Insulation is used in a variety of different ways in the construction of homes and buildings. It is placed between walls, in attics, around pipes, and in basements. Insulation helps keep the hot air inside during the winter and cool air inside during the summer.
It is something that you will want to inspect once a year to ensure that it is still working properly. Insulation protects your home from heat and cold by slowing the movement of heat through attic walls and ceilings. Without it, your home would quickly lose the temperature you have carefully adjusted it to.
You should also be aware of another important term when talking about insulation which is the “R-Value”. The R-value measures an insulator’s thermal resistance by measuring the time it takes for heat to pass through a certain thickness of the material. The higher the R-value, the more insulating efficiency a material has.
There are several types of attic insulation to pick from when it comes time to install or replace the insulation. Among these are blown-in and rolled, which is also known as batt insulation. Blown-in insulation is much easier for an experienced contractor to install but rolled insulation may be better at preventing air infiltration.
What is Blown-in Insulation?
Blown-in insulation is a type of insulation that fits in tight places and helps you keep the heat in your home where it belongs.
If you’re thinking about insulating your home, great! Blow-in insulation is a popular choice that can be used to install or supplement existing insulation.
Blown-in insulation is made up of small fibers, which means it doesn’t come in fixed shapes or sizes as some other types of insulation do. These fibers are often made from recycled materials, making them eco-friendly. The most common blown-in insulations are cellulose and fiberglass.
Blown-in insulation is usually installed by professionals using special equipment to blow the material into attics, walls and other spaces. These professionals typically wear protective gear to make sure the process goes smoothly.
The benefits of blown-in insulation: Blown-in insulation provides many advantages over other types of insulation, including ease of installation and eco-friendliness. It also offers energy benefits for your home. It is excellent for irregularly shaped and sized spaces, as well as those with low ceilings or where access may be difficult due to obstructions or obstructions.
Because blown-in insulation fits so well into hard-to-reach places like attic rafters and between wall studs, it can provide better coverage than batts or rolls.
What is Rolled Insulation?
Rolled insulation is the industry term for an insulating material that is sold in rolls. It’s usually made from fiberglass, rock wool, and other mineral or natural fibers, and it’s commonly used to insulate buildings by sealing off spaces between joists and studs.
Rolled insulation is a type of insulation that’s made off-site and rolled up into large rolls. This is flexible insulation that may be used in rooms with typical space and ease of access. It’s typically installed in a space between the drywall and the studs of your walls, but it can also be used in other places, like attics or crawl spaces.
When comparing blown insulation to rolled and batts, it’s crucial to remember that rolled insulation does not need any special equipment, but it is frequently tough to fit in non-standard or irregularly shaped locations.
So which one is best for your home insulation needs, rolled insulation or blown in insulation?
When comparing blown-in insulation to rolled, you must look at the R-values. The actual R-value of the insulation you use will be stated by the manufacturer, however, according to the Department of Energy, standard fiberglass batts have an R-value range of 2.9 to 3.8 per inch, and high-performance fiber has an R-value range of 3.7 to 4.3 per inch. For blown-in insulation, fiberglass has an R-value of 2.2 to 2.7 per inch and cellulose has a range of 3.2 to 3.8 per inch.
If you need assistance with deciding which type of insulation is best for you or anything about insulation removal and/or installation for your home or building in San Antonio, TX, contact a local insulation contractor such as America Air Duct Cleaning. We will be able to help you determine the R-value you need as well as the type of insulation that will work best in your area.