Air Duct Cleaning Services:
Insulation Removal New Braunfels
Removing insulation can be tricky and dangerous, but improving your home’s energy efficiency is often necessary. If you’re looking for an insulation removal service, America Air Duct Cleaning Services in New Braunfels is the right choice. We are dedicated to providing our clients with the best service possible.
Contact us today for the best insulation removal services!
Let Us Call You for Free Consultation
Why Should You Remove Your Current Insulation?
Insulation can harbor dust, mold, and other allergens that can cause respiratory problems. Removing insulation will eliminate these potential health hazards and improve your house's air quality.
Moldy & Wet
If you have moist or moldy insulation in your attic, you probably have a leaking roof. While addressing the core cause of the damaged insulation by repairing the leak is a vital first step, you will also need to remove and replace the affected insulation. This will restore the health of your attic insulation and save your energy expenditures.
Because of scientific advancements and the introduction of new materials, the things we use every day have improved over time. The same is true for your attic insulation. New attic insulation might result in higher energy efficiency and reduced energy expenses if your house was not recently built.
Schedule an Appointment Now
How Does Insulation Removal Work?
Though each property is different, most insulation removals will take the following steps:
Preparation is essential for successful removal and long-term replacement. Because many older houses might have pollution and rodent infestations in certain places, the preparatory processes will be proportional to how damaged or infested your present insulation is.
The removal method varies depending on the insulation, such as fiberglass batt insulation, foam insulation, or batt insulation. A vacuum device is used to transport hazardous blown-in insulation out of your house in a safe and restricted way. This may be less expensive than removing batt insulation, which must be rolled up by hand and hauled away.
Once your old insulation has been removed, it must be replaced as quickly as possible. The procedure of removing insulation might be tricky. Each phase will have unique characteristics that may impact the final cost. When assessing cost, the most important things to consider are time, tools, and the extent of the contamination.
When Is Insulation Removal Necessary?
Adding insulation to a house may provide various advantages, including lower energy costs, improved comfort, and increased property value. However, in rare circumstances, insulation removal is required when:
Spray foam is being used to replace existing insulation.
Insulation removal is necessary to replace existing insulation with spray foam. This is because spray foam needs a clean surface to adhere properly. If there is old insulation present, it can prevent the new spray foam from properly attaching to the walls. In certain circumstances, you may just need to clean the surface and add fresh spray foam, but in other scenarios, you could need to totally remove the old insulation.
You’re replacing your current insulation with faced insulation.
Faced insulation is a type of insulation with a paper or foil backing that helps it resist moisture. When you’re replacing your current insulation, it’s important to remove any old insulation that may be present. This will help ensure that your new insulation will be properly installed and function as intended.
You’ve experienced rodents or other pests.
If you have had any kind of rodents or pests in your home, it is necessary to remove all the insulation in your home. These animals can leave behind urine and feces that will contaminate your insulation and make it unsafe for your family. To protect your family from disease, you must professionally remove and replace your home’s insulation.
You’ve sustained water damage.
Insulation removal is necessary when you have sustained water damage in your home. Insulation is a material that helps protect your home from the elements. When it becomes wet, it loses its ability to protect your home from the elements.
Water can seep through insulation, causing it to swell and become brittle. This can result in an unwelcome spread of mold and lead to structural destruction. After water damage, mold is a significant issue. Breathing in mold spores may lead to various health issues, including irritating the respiratory tract and the skin and even an allergic response. Wood decay and discoloration are just two problems that mold may create in your house. Water can also cause electrical problems. Water can damage wiring and create a fire hazard.
What Are The Costs Of Insulation Removal?
Attic insulation removal will cost between $2,000 and $3,000 for a 1,500-square-foot attic. On the other hand, a DIY attic insulation removal job may be done for $1,000-$1,500. Again, the cost is heavily dependent on the attic’s condition.
The time it takes to remove all of the attic insulation depends on your availability, your speed in a confined area, the weather, the kind and quantity of insulation that is removed, and whether or not there is debris in the attic. Whether you hire an insulation professional or remove attic insulation, proper study and preparation may significantly minimize the cost.
How Long Does Insulation Removal Take?
Insulation removal will take roughly 4-6 hours for a 1,500-square-foot attic. This is based on a team of three attic cleaning professionals with the necessary equipment and training. Insulation removal in a 1,500-square-foot attic might take 6-18 hours for a do-it-yourself job. The attic’s environment largely influences the period.
The time it takes to remove all of the attic insulation depends on your availability, your speed in a confined area, the weather, the kind and quantity of insulation that is removed, and whether or not there is debris in the attic. A decent strategy will have you tackling the attic in phases. Once a smaller attic area is finished, you may decide whether to continue or cease working for the day. Plan to perform an attic insulation removal job over a few days and potentially over a few weekends if your completion timeframe permits.
What To Do After Attic Insulation Removal?
You now have full access to the attic floor, eaves, electrical wiring and fixtures, plumbing, and HVAC equipment since the attic is clean and has no insulation. Following the removal of the attic insulation, the following projects must be completed:
- Electrical repairs in the attic
- Installation of a radiant barrier
- Repairs to the plumbing
- Replacement of air ducts
- Installation of a whole-house fan or an attic fan
- Installation of attic flooring
Why Should Hire Professionals Handle Attic Insulation?
You should think carefully before doing attic insulation removal on your own. When removing insulation in your attic, you may encounter several concerns, such as a mouse infestation or dangerous chemicals. The specialists will know what to do in these cases, resulting in professional outcomes. Why should you leave attic insulation to the professionals?
Taking Care of Rodents
Even if you choose the best attic insulation and understand how to install it correctly, you may be surprised when you get to the attic. Some homeowners discover they have rodent control issues only after attempting to install attic insulation. If this occurs to you and you don’t know what to do, you’ll have to call in the pros. If you encounter a situation like this, delegating authority from the start is preferable.
Handling Dangerous Materials
Your attic may contain dangerous items ranging from fiberglass insulation to asbestos. It’s easy for homeowners to ignore these materials since it’s not second nature for them to be cautious. Materials such as asbestos may be innocuous if not disturbed, but you may disrupt them when installing insulation. The pros will handle the risk so that you do not have to.
As your local insulation removal experts, America Air Duct Cleaning Services is here to help you with all your insulation needs. Whether you need to remove old insulation for a home renovation or add new insulation to improve your home’s energy efficiency, we can help.
We offer a variety of insulation removal and installation services, so we’re sure to have a solution that fits your needs. Contact us now to learn more about our insulation removal services and how we can assist you in improving the energy efficiency of your house.
It is determined by many variables, including the kind of insulation and its state. If the old insulation is in good condition and isn’t in the way of the new insulation, you can leave it in place. However, if the old insulation is damaged or in the way of the new insulation, you’ll need to remove it before proceeding.
Removing insulation yourself is possible, but it can be difficult and time-consuming. It is essential to use safety equipment, such as gloves and a mask, and to avoid damaging the insulation or the wall behind it. If you’re unsure how to remove insulation safely, it’s best to hire a professional.
Assuming you have a suitable shop vac, you can use it to remove attic insulation. Make sure to use the correct attachments and follow the manufacturer’s instructions to avoid damaging the vacuum or the insulation.
Yes, you can remove blown-in insulation by hand. However, it is a time-consuming and messy process. It is also essential to be careful not to damage the walls or ceiling while removing the insulation.
If you breathe in old insulation, you could get sick. The symptoms of this illness include fever, coughing, and difficulty breathing. If you think you’ve been exposed to old insulation, it’s essential to seek medical advice as soon as possible.